Mixing Instructions for Dry Glazes

For the perfect consistency, we recommend:

• Mixing about 13.5 fl oz of our Mix Master Glaze Liquid per pound of dry glaze.
• If you want to make a dipping glaze, we do not recommend adding more liquid, which will dilute the color too much.
• Instead, add a drop of our Sodium Silicate solution until you achieve the desired consistency (no more than 5 drops, too much sodium silicate will have the opposite effect).
• Sodium silicate thins the glaze without diluting it.
• For best results, we recommend running the liquid glaze through a 80-mesh sieve and letting it sit overnight before use. 

Important: Aways wear a mask that meets NIOSH-N95 standards while handling dry chemicals.

 

General Warnings: Contains crystalline silica and/or other hazardous materials. May cause cancer by inhalation when in dry state and may cause damage to lungs through prolonged or repeated exposure by inhalation (silicosis). Prevention: Do not handle until all safety precautions have been read and understood. Do not eat or drink or smoke when using this product. Do not breathe in dust. When in dry form and in case of inadequate ventilation wear NIOSH-approved respiratory protection. First Aid Measures: If exposed get immediate medical attention. Flush eyes with water. In case of inhalation, move to fresh air immediately. Disposal: Dispose of contents/containers in accommodation with local regulations. California Proposition 65 Warning: this product can expose you to chemicals, including crystalline silica, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov.