Mixing Instructions for Dry Kiln Wash

• Add 2 parts water to 1 part Kiln Wash. Mix well before using.
• Kiln wash contents will settle, that's normal! Just like house paints, kiln wash needs to be fully mixed to ensure smooth consistency.
• We recommend mixing well for at least 1-2 minutes.
• Once mixed, apply several thin coats to the top layer of your shelves, letting it dry thoroughly in between each coat.
• Use a brush, roller, or even a sprayer. Ideally, you should first bisque fire your kiln shelves before firing your pots on them.
• Important: do not apply to fiber-based or silicon carbide shelves.

 

General Warnings: Contains crystalline silica and/or other hazardous materials. May cause cancer by inhalation when in dry state and may cause damage to lungs through prolonged or repeated exposure by inhalation (silicosis). Prevention: Do not handle until all safety precautions have been read and understood. Do not eat or drink or smoke when using this product. Do not breathe in dust. When in dry form and in case of inadequate ventilation wear NIOSH-approved respiratory protection. First Aid Measures: If exposed get immediate medical attention. Flush eyes with water. In case of inhalation, move to fresh air immediately. Disposal: Dispose of contents/containers in accommodation with local regulations. California Proposition 65 Warning: this product can expose you to chemicals, including crystalline silica, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov.